CTC Casework Configurator Content Installation Guide
CTC Casework Configurator Content Install Guide
August 23, 2019
https://www.ctcsoftware.com
Page 2 of 3
Overview
The content in this package is intended to be used with the CTC Casework Configurator tool. Though it is not required,
this guide presumes that the Casework Configurator Revit add-in has been installed and configured prior to downloading
this content package. If not, please refer to the Casework Configurator User Guide for information regarding installation
and license activation.
Content Configuration
The content from the zip file must be copied into the folder location specified in the Casework Admin tool. To set or
check the folder location to be used, open the Casework Admin tool and click the “Data Settings” button. Please note
that the content is available for the latest three versions of Revit, for convenience, but the procedure is the same for all.
The application from which the download process is initiated will get the content appropriate to its version.
Set or note the path used here, the content folders in the zip file will need to be copied to this location.
Unzip and/or open the Casework Content Zip file and copy the folder within.
Important: Do NOT change the names of the sub folders. Paste this folder into the location from the previous step.
